About this 3D model

Three different bins for Gridfinity to be printed in vase mode: 1x1x9 1x2x6 2x2x6 Print Settings: Enable vase mode and configure number of bottom layers to correspond to 6mm (20 for 0.3mm layer height, 30 for 0.2mm layer height). I printed these with a 0.6mm nozzle I really like the original model but wanted to have magnets press-fitted instead, so I changed the holes (6mm x 2mm). I recommend using my magnet jig https://makerworld.com/en/models/157411 but you have to be careful and support the inside of the bin, otherwise it might break inserting the magnets