About this 3D model

Love 2 (literally *grin*) Print Time About 3 hrs 24 min P1P/ Bambu Basic PLA in CMYK Colours (Total of 4 colors used) THIS IS NOT SET UP TO CREATE WITHOUT AN AMS but i am sure it is possible Recommended with Bambu Basic PLA CYMK & Print Profile But I use Often use other filament (Sunlu PLA+ white, Bambu PLA Magenta, Sunlu PLA+ yellow and Sunlu PLA+ light blue)as well Aux fan is OFF (if using one) Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20 Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing 0.20 Standard Print Profile First Layer .1mm Other layers .15mm ARACHNE walls 2 wall loops 5 top shell 3 bottom shell INFILL: 100% rectilinear Speed: Slow Down For Overhangs is Turned off (UNCHECKED) Prime tower enabled Brim/Bed Adhesion: None Needed Flushing set for 1.00 (you will need to adjust this for your filaments and machine type but i often range between .60 and .75)