About this 3D model

These links will extend the wheelbase of the FCX24 by 10mm via longer upper y-link and lower links. They can be used in the front or rear (the stock links are the same length on both ends). There are options for straight and high-clearance lower links. Transfer all stock hardware. No other hardware is needed. The holes in the wider part of the y-link should be cleared out with a 1.7mm or 1.8mm drill bit.You will also want to use a longer driveshaft and add shock mounting holes on the shock towers to correct the ride height (https://www.myminifactory.com/object/3d-print-240231).