About this 3D model

VW Bus “Surfing Lifestyle” Hueforge print. 200mm x 160mm See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Sky Blue Transmission Distance: 8.6 PLA+ Sunlu Sunny Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Sky Blue At layer #14 (1.2mm) swap to Sunny Orange At layer #19 (1.6mm) swap to White for the rest. if you want to change your slicer and do it at 0.04mm Layer height use the setting below, this is what I printed the included photo at. takes to long to slice so kept erroring out on Makerworld. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Sky Blue Transmission Distance: 8.6 PLA+ Sunlu Sunny Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Sky Blue At layer #22 (1mm) swap to Sunny Orange At layer #31 (1.36mm) swap to White for the rest.