About this 3D model

This adaptor alows you to transform two zeno cages in one super spacious cage. Zeno cages are a very popular option for small animals. But if you ever find that yours is too small for your pets, chance are you can find an other used one for a very low prince, and then you can double it with this ZENO CAGE EXTENSION ADAPTOR! Instruction: - Either print 2 halfs per corners and glue them together or print four of the whole ones. - Remove the top mesh of one of the cage (it sould easily pop out if you push upward on the mesh's frame - Remove the bottom from the other cage - Remove the platic covers from the bottom of the frame to reveal a whole in every corners of the cage without a bottom. - Insert the adapter in the holes of either cage - Place the cage without a bottom on top of the one without a top. (Make sure the cage bars are correctly secured in the notches of the adapter) -Secure the two cages together with rope or metal wire if you need to be able to lift it by grabbing the top part (optionnal) Print settings: Resolution : 0.28mm Infill : At least 60% Material : PLA