About this 3D model

Summary Simple bed worklights so you can see. Light are hidden behind the shell for a clean look and to allow for diffusion of the light. The lights are connected to my heater 12 V supply. Std. 20 ma LEDs in bundles of four. The cover can be printed at scale and sanded to create a "snap fit"; or you can print it undersized and glue. I recommend snap fit as you can re-open the cavity if required. These were printed in std. white PLA to allow for light diffusion. I used a simple MT3608 to provide the voltage regulation; else you will get dimming when the bed heater cycles. I created an inline box for the MT3608. It snaps in with a similar snap fit cover. Alternative mounting location/method: Auxiliary Supports for 3KU K3000 Frame http://www.thingiverse.com/thing:2040141 OnShape Design Files: https://cad.onshape.com/documents/799e0e2116dbe00880747d17/w/0c23adc994b0e42d4db88586/e/24cf5c04b0f90f4c745fa3da https://cad.onshape.com/documents/326341208a1c4f5383df32d7/w/7d7556d083d098313c22980e/e/1dfd53c982e6d9a5ffadee8a Print Settings Printer: 3KU K3000 Rafts: No Supports: No Resolution: .100 mm Infill: 20%