About this 3D model

Drawer organiser for a standard 600mm wide cabinet with Blum brand drawer hardware. I wanted to maximise the space in the drawer and I designed them around what gadgets and doo-dads we have in our (messy) drawer. I also wanted removable tubs so cleaning them out is super easy. I contoured the Side tubs to match the internal curvature of the drawer. Internal dimensions are in the photo, 523mm wide and 475mm deep. Created in OnShape https://cad.onshape.com/documents/4e97561d9d7ac45b1b9fd906/w/656936e8ae6b70c2181dce28/e/0bf390ee7929762613226cb5?renderMode=1&uiState=65ad989c4b8ff86d83342588 You will need to print the following. (the .3mf file attached has all required copies) 2 x A 4 x B 2 x C 1 x D 1 x E 1 x F 2 x G 2 x H NOTES: Supports are required for all of the Side tubs. For smoother fillets, turn on variable layer heights. The 2 x C's and 1 x D can be glued together. The front and back rows, Parts A and E, are not the same length. Parts G and F are slightly longer to make up the ~1mm extra space at the back of the drawer I ran out of grey filament mid print for part F, oops This could be further optimised to make parts clip together etc but I'm pretty happy how it is for.