About this 3D model

Bambu Studio / Orca Slicer settings: Global, Taka_1, Taka_3: - layer height: 0.2mm- line width sparse infill: 0.6mm- line width walls: 0.5mm- wall loops: 0- top shell layers: 0- bottom shell layers: 0- infill density: 62%- infill pattern: Grid- infill anchor: 1000 (unlimited)- max infill anchor: 1000 (unlimited)- infill direction: 45°- infill/wall overlap: 90%- detect narrow internal solid infill: no- speed sparse infill: 18 mm/s- reduce infill retraction: no- enable support: no- brim: outer and inner, gap 0mm Taka_2: - walls: 12- object flow ratio: 1.2 Taka_4: - line width sparse infill: 0.4mm- infill density: 25%- infill pattern: rectilinear- infill direction: 0° Taka_5: - line width sparse infill: 0.4mm- infill density: 25% Taka_6: - object flow ratio: 1.2- infill density: 100%- infill pattern: rectilinear- infill direction: 0° Taka_7: - infill density: 99%- infill direction: 0° Taka_8: - line width sparse infill: 0.3mm- object flow ratio: 2- infill density: 80%- infill pattern: triangles Taka_9: - walls: 12 Filament: - Retraction: 1.8mm- Wipe: no- Z hop: 1.2mm, Normal type- Max volumetric speed: 2.5 mm^3/s - Temperature: 215°C - 225°C --- Website: https://www.riverfamily.art/