About this 3D model

I think the Apex Heirloom is really cool, so I made a highly restored Cosplay Heirloom. Remember to use a multicolor printer. The connecting parts require a TPU component. Other parts are attached with magnets or glue. Nozzle 0.4 Printing Recommendations 1. Default speed is 200, but you can reduce the printing speed if you're worried about printing failure (because I'm using an X1C). 2. Remember to use glue for the bed (ensure that the gluing is done). If there are individual printing failures, use the part skipping function to print a specific model in the slicer separately. 3. Remember to level and calibrate before printing.