About this 3D model

Utilising HueForge's 'Colour Pop' setting, this Koi print really stands out - the colours separated beautifully and blended individually within it's own colour profiles. It's a bit of a long print, and it's a lot of white - but I think it's absolutely worth it! The 3MF will have everything loaded in including the filament swaps for Bambu Studio. If you're not using Bambu Studio, download the STL and use the following instructions: Print Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used: PLA+ Overture Dark Blue Transmission Distance: 1.8 PLA META Sunlu Teal Transmission Distance: 5.4 PLA Kingroon White Transmission Distance: 8 PLA BambuLab Tough Vermilion Red Transmission Distance: 3 PLA CC3D Lemon Yellow Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Dark Blue At layer #6 (0.4mm) swap to Teal At layer #15 (0.76mm) swap to White At layer #36 (1.6mm) swap to Vermilion Red At layer #41 (1.8mm) swap to Lemon Yellow -At layer #45 (1.96mm) swap to Jade White for the rest. _______________________________________ If you'd like to support me, I now have a Patreon ! Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon! _______________________________________