About this 3D model

This purchase will grant you LIFETIME COMERCIAL LICENCE to sell the 3D print of this file forever. If you join my TRIBE you will get licence to sell 3D print of all my files including this file. NOTE: NON REFUNDABLE if you join my Tribe AFTER this purchase. There is an invasion coming!!! Can you roll a natural 20 to fight off the UFOs? Here is a FUN Dice tower for all your dice rolling games. It is out of this world fun, and it lights up. PRINTING INFO: Printed at 0.20 mm layer height. File is split into five parts. Supports recommended for underneath the UFO on the main part also for the cable conduit. The section that light shines through is best visible with transparent filament but white filament will also show the glow well. For the cows I have glued mine in, but you can choose not to glue them in. As more options come out, as a vendor if you want you can choose to sell the Tower and have the client pick and choose which 3 items they want for the field. For the light I used COB LED 5V light strip with 2-pin 8mm LED COB Strip connector and SinLoon USB Male with On/Off switch to stripped ends. ASSEMBLY INSTRUCTIONS: Once all parts are printed add the lights to the UFO base, making sure to put the cable through the indent of the UFO. Then glue the transparent strip onto the UFO making sure to align the notch for the cable with the UFO notch. Glue the top of the UFO aligning with the three notches on the UFO base. Then glue cable conduit to better hide the cable, then add cows to the scene. Please refer to the video attached to this post for assembly instructions. https://c10.patreonusercontent.com/4/patreon-media/p/post/123362973/085bf8811432446394fe3a645a512205/eyJhIjoxLCJwIjoxfQ%3D%3D/1.mp4?token-hash=wUx4Brk6qW1B-so0yzLTQnMkONBCa-r0H_2dq59470o%3D&token-time=1767139200