About this 3D model

I call this “Dueling Dragons”, Colored with Hueforge. Size is 160x160mm, and 200x200mm, I also included layer heights if you want to experiment with other colors. If you want to change a color, I would recommend the grey/silver. Also included is a print profile for if you do not own an AMS, I added pauses to the appropriate layer heights for filament change. Let me know if you find any issues. I cannot upload a 200x200mm Print Profile without simplifying the model and loosing quality. MakerWorld states the slicing takes too long and will not allow it. For 200x200mm Please use the 3mf in the “raw files” or open the 160x160mm and scale the X and Y to 200mm but NOT THE Z. Slicing will take a little while depending on your PC but it is not frozen at 15-25%, just have to wait it out. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA SILK Sunlu Grey/Silver Transmission Distance: 2 PLA SILK Sunlu Bronze/Gold Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #16 (1.44mm) swap to Grey At layer #18 (1.6mm) swap to Gold At layer #22 (1.92mm) swap to White for the rest.