About this 3D model

Dragon Ball Color lamp using normal paper image printer Note that to make the color lamp you have to print on paper (on a normal paper printer) the images on the zip file. Print the images as they are and glue it inside of the lamp each on his position. Can be used without the top part (is on separate file) or with the top part which is the image of shenlong. The main body include a part to use a 20 mm bulb or can simply use a piece of led strip ( I used a piece of led strip ). As all on FDM 3d print for better quality, print on a small layer height 0.08, 0.12 or 0.16. Also a bit low speed can help with the quality. Can be printed at 100% infill with out using supports. The center part is hollow to past the cable for the light to the switch. The non 3D parts are a switch and a voltage connector (can avoid the voltage connector if like and connect directly to the switch). Or you can add your own base, I think is easy with switch and the connector and adapter in case would like to move it to other location. Any questions or help, please feel free to contact us. Follow us on Instagram and youtube for more: https://www.instagram.com/lrcustoms/?hl=es https://www.youtube.com/channel/UC3_c6fH_6cQuHi-jA_igONQ