About this 3D model

After Homer… it's turn of Lisa! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Geetech Black Transmission Distance: 0.5 PLA+ Sunlu Red Transmission Distance: 6 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Geetech White Transmission Distance: 6 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.