About this 3D model
我根据马里奥游戏中问号砖块的造型，制作了一款ITX机箱。 它支持ITX主板、48mm以内的CPU散热器、双槽全高的显卡，以及Flex电源。 我对机箱六个面全部做了拆分和减重，最大程度降低了打印难度和耗材的消耗！ I used a large language model to help me translate the project instructions, and there may be translation errors. Please excuse me. I made an ITX chassis based on the shape of the question block in the Mario game. It supports ITX motherboards, CPU coolers within 48mm, dual-slot full-height graphics cards, and Flex power supplies. I disassembled and reduced the weight of all six sides of the chassis to minimize the difficulty of printing and the consumption of consumables! 机箱兼容性： 机箱外尺寸218.4×208.4×198.4mm（9L，含问号） ITX主板（170×170mm） 散热器限高48mm 双槽全高PCI位 显卡限长183mm（使用"问号砖块机箱_正面_显卡不限长.stl"替换机箱正面可以不限显卡长度，但会变丑） Flex电源 5cm机箱风扇位1个 12mm开机按钮（开机线） PCIe转向卡搜索关键词：PCIe转向卡 SKTC A09 所需的五金配件： M3×10沉头内六角自攻螺丝（机箱各个面连接用） M3×12沉头内六角自攻螺丝（机箱各个面连接用） M3×14沉头内六角自攻螺丝（机箱各个面连接用） M3×14沉头十字平尾自攻螺丝（机箱各个面连接用，隐藏螺丝） M3×8大扁平头十字自攻螺丝（固定主板用） M3×5×7圆头带垫十字螺丝（PCI位用） M3×4×5铜嵌件螺母（PCI位用） 可选的五金配件： M4×30×8扁平头十字螺丝（固定机箱风扇用） M4六角螺母（固定机箱风扇用） Chassis Compatibility: External dimensions of the chassis: 218.4×208.4×198.4mm (9L, including the question mark) ITX motherboard (170×170mm) Maximum height of the cooler: 48mm Dual-slot full-height PCI slot Maximum length of the graphics card: 183mm (By replacing the front panel of the chassis with "问号砖块机箱_正面_显卡不限长.stl", there will be no limit on the length of the graphics card, but it may look less aesthetically pleasing) Flex power supply 1× 5cm chassis fan slot 12mm power button (power cable) Required hardware fittings: M3×10 flush cup head socket cap screws (for connecting various sides of the chassis) M3×12 flush cup head socket cap screws (for connecting various sides of the chassis) M3×14 flush cup head socket cap screws (for connecting various sides of the chassis) M3×14 flush cross recessed flat point self-tapping screws (for connecting various sides of the chassis, for concealed screws) M3×8 large flat head cross recessed self-tapping screws (for fixing the motherboard) M3×5×7 round head with washer cross recessed screws (for PCI slots) M3×4×5 copper inserts nuts (for PCI slots) Optional hardware fittings: M4×30×8 flat head cross recessed screws (for securing chassis fans) M4 hex nuts (for securing chassis fans) 组装视频（Assembly demonstration）：