About this 3D model
This is an enhanced kit for the question mark brick case I have further refined the case's thermal management, incorporating additional ventilation apertures and fan mounts Subsequently, I integrated a superior carrying handle, two 2.5-inch hard drive bays, and robust rubber feet to the base Ultimately, I have achieved a configuration that I personally find exceptionally satisfactory The newly uploaded model files encompass only the modified components; the remaining model files are available for download from my preceding project Here is the link: https://makerworld.com/zh/models/166193 Update February 26, 2024: I have subtly realigned the rear chassis fan and PCI slot positions to mitigate any potential interference Please utilize the updated “ 问号砖块机箱_背面_散热增强v2.stl ” or “ 问号砖块机箱_背面_散热增强v2.3mf ” files to reprint the rear chassis panel!!! Upgraded Chassis Specifications: External dimensions: 218.4×208.4×198.4mm (9L, including the question mark) ITX motherboard (170×170mm) Maximum cooler height: 48mm Dual full-height PCI slots Maximum graphics card length: 183mm Two 2.5-inch hard drive bays Flex ATX power supply Two 5cm fan mounts 12mm power button (with power cable) Newly Available Optional Accessories: Hard drive bracket Carrying handle Rubber feet Required Hardware for Upgrade: M3×10 countersunk hex socket self-tapping screws (for chassis panel assembly) M3×12 countersunk hex socket self-tapping screws (for chassis panel assembly) M3×14 countersunk hex socket self-tapping screws (for chassis panel assembly) M3×14 countersunk cross flat-head self-tapping screws (for chassis panel assembly, concealed screws) M3×8 large flat head cross self-tapping screws (for motherboard mounting) M3×5×7 round head washer cross screws (for PCI slots) M3×4×5 copper insert nuts (for PCI slots and handle T-nuts) M4×30×8 flat head cross screws (for securing chassis fans) M4.5×12 round head cross flat-head self-tapping screws (for securing chassis fans) M4 butterfly nuts (for securing chassis fans) M4×10 round head cross flat-head self-tapping screws (for securing rubber feet) 19×15×11 rubber feet (for chassis base) Instructional Video: