About this 3D model

Customizable Ammunition Boxes Infill for .308 and 7X57R included Can be modified to suit various cartridge lengths and diameters STL/3Mf/STEP files included (created with Solid Edge) To engrave the caliber, create text in your slicer, apply it as a modifier, and set the “Embedded depth” to 2 -0.2mm layer height -20% infill Required Fasteners: - 8x M3x20 screws - 8x M3 nuts Assembly: - The infill may require gentle tapping with a rubber mallet to ensure complete seating; otherwise, the lid may not close fully !0.5mm clearance from the box bottom is factored in! For loose fits, consider using a few drops of superglue - I installed the M3 nuts into the recesses using a pull-through technique (Simply attach the corresponding locking component, screw in the M3 screw until resistance is met, then attach the nut and pull it through) Update: Added a simplified closure mechanism Secure the M3 screw at the base as this serves as a locking mechanism Feedback is most welcome :D Kind regards -------------------------------------------------