About this 3D model

My TRIBE for 4.9$ A cute articulated sea turtle. Print-in-place and doesn’t need supports to be printed. For personal use only All my files are protected by Copyright, should NEVER be shared or resold. To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit: www.patreon.com/bottega3d If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result. If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me. Please note: After painting the eyes, I filled them with uv resin. NOZZLE DIAMETER: 0,4 mm. LAYER: 0.15 or 0.16 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO SMALL VERSION: NOZZLE DIAMETER: 0,4 mm. LAYER: 0.10 or 0.12 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO BIGGER: NOZZLE DIAMETER: 0,4 mm. LAYER: 0.20 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO