About this 3D model

Machine and money box with various games. Enjoy and save at the same time. Big machine with several discs to play, also a blank disc so you can make your own circuits. Two types of steering wheel, Tesla type steering wheel and retro steering wheel arcade machines 80s. Some circuits have two positions and two levels, one difficult and one easy, just turn the disc 180 degrees and you will get the circuit that indicates the engraving, Easy or Difficult. The transmission belt must be made of TPU so that it can be stretched. It is intended for 1:1 scale, and to be made on large machines with 300x300 bed, although it could be scaled up to make it smaller then you would have to make a smaller coin or a small steel ball. You will also need some M4 bolts and nuts to tie both boxes together, and a M6 X 40 mm bolt to tie and change the flywheels , the rest of the components are joined with threads from the parts themselves. Convenient to pour a little oil in the area of rotation of the flywheel and disc so that it does not make noise. Printed parts list: 01_Box sup Game (version letters).stl 01_Box sup Game.stl 01_Letters for box sup game.stl 02_Box inf coin.stl 03_Tap rear coin.stl 04_Tap rear Game.stl 05_Axis Wheel.stl 06_Steering Wheel retro.stl 06_Steering wheel tesla yoke.stl 06_Tesla cover.stl 07_Upper Pulley.stl 08_Pulley TPU 70 teeth.stl 09_Rear lower steering wheel nut.stl 10_Rear upper disc nut.stl 11_Blank disc for new games.stl 12_Disc game slalom.stl 13_Disc game circuit.stl 14_Disc game Laberinth.stl I hope you like it. Javier.