About this 3D model

Remix based on multiple models, mainly based on the TILT PHONE STAND V2.0 Remixed by Matthew Ghost - MakerWorld and TILT PHONE STAND V2.0 Remixed by brady.bowling - MakerWorld + valuable feedback from users in comments! A MUST-HAVE FOR ALL ENGINEERS, TECHNICIANS, CRAFTSMEN, HOBBYIST… JUST FOR ALL WHO LOVES TECHNICAL BASED THINGS!!! Notable changes and improvements: added a hole for desk fixation by a screw in the rear part added small extruded holes for rubber legs at button part of the base base - more stable design for bigger smartphones; now you do not need to be worried about the stability! stand - added a bottom and top edge parts for better stability adjustable wheel - modified design, should be easier to adjust; also added a nice 3D effect on the top face :) small adjustments and improvements in the overall design… Printing: PLA or PET-G organic supports for “base” part 0,20 mm layer height 0,40 mm nozzle size grid infill type 15% infill density 2 wall loops minimum 4 bottom layers (for a nicer embossed logo) Changelog: Rev1 /03.02.2024/ - initial release Rev2 /04.02.2024/ - updates based on the feedback modified “base” - cleaner part for smooth control of the adjustable gear modified “base” - optimise holes for rubber legs at the bottom part of the base for a better print adhesion modified “base” - add few chamfers and fillets for a gear part - better look, no more sharp edges modified "adjustable gear" - change the logo part for a better print bed adhesion NEW - added 2 versions of the base - A) hole under the connector for organic support; B) no hole under the connector - choose what you prefer more, both tested :) Rev3 (17.02.2024) - improved the design of “Gear” - more friendly to your fingers :) From the original model: It is not necessary to glue the parts here. Everything is printed in one piece (please, use pre-sliced file) There is an improved guide groove that does not allow slipping. The gears fit together better, which allows more comfortable tilting. The adjustable gear contains a groove, which allows the exact position of the gears. No glue is needed. Smooth design! FEEL FREE TO REPORT ANY ISSUES OR IDEAS—I CAN MODIFY THE MODEL FOR YOU!