About this 3D model

Holds a PTFE coupler a little more forward than the other models for a gentler curve of the PTFE tubing. The holder is held with a screw and can rotate freely if not screwed in all the way. There is a small indent on the side for some adhesives so it hugs the curve of the machine more tightly. If you're using a Y-splitter, you can reuse the included coupler from your Bambu. * Update May 2024: Added an improved design which uses the ridges on the included coupler to securely lock it in place. * Update Feb 2025: Removed all files that requires heat set inserts. It was a source of confusion for mismatched screw sizes. Updated design, no longer requires any inserts. Single 3MF for all required parts. You can also use the include STEP file to modify based on what screws you have. (Example: Import to Onshape > Click Screw Hole > Move Face) Requirements: 1x M3x8mm and 1x M3x12mm for mounting to the machine 1x M3x6mm to secure the coupler to the mount 4x Countersunk M3 screws between 4-8mm in length for the coupler