About this 3D model

I created that lightbox by request for a buddy of mine. I had some trouble printing it, the parts would not stay together. I had two different brands of PLA and I guess they didn't like each other, after I printed everything in Bambu PLA I had no problems at all. But I created two version of this light box. Version 1: The Logo is 3 Layers Version 2: The Logo is 3 Layers + 1 Layer white that helps to keep the Logo together After I switched to the Bambu PLA there was no need for the white support Layer anymore. If you have the same Problem just try the one with the support layer. If you like my work and want to support me then feel free to buy me a beer By me a beer Electronics: I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires The power supply and the DC barrel connector I used https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1 https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details Assembly: Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill. Measure the length of the light strip and then cut it to length. Solder the wires and the barrel connector to the light strip Mount everything into the front part Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures Close the box For more details check this light box. https://makerworld.com/de/models/60268#profileId-62430 Boost Me