About this 3D model

I created that lightbox by request for a buddy of mine. If you have the problem that the parts don't stay together, print Version 2. The 4th Layer is an support Layer to help the parts stay connected to each other. Version 1: The Logo is 3 Layers Version 2: The Logo is 3 Layers + 1 Layer white that helps to keep the Logo together Here you find the English version: https://makerworld.com/en/models/176174#profileId-193681 If you like my work and want to support me then feel free to buy me a beer By me a beer Electronics: I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires The power supply and the DC barrel connector I used https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1 https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details Assembly: Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill. Measure the length of the light strip and then cut it to length. Solder the wires and the barrel connector to the light strip Mount everything into the front part Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures Close the box For more details check this light box. https://makerworld.com/de/models/60268#profileId-62430 Boost Me