About this 3D model

Everything that has to do with barbershops and the culture around them has always been something I'm passionate about. So why not combine this passion with 3D design to make a stunning barbershop lamp? Transform your space into a vibrant haven with the barbershop's lamp. Showcase it in various setups - whether on a table, on a wall or on an IKEA Skadis board. Extra parts needed : LED Lamp Kit from Bambu Lab CA Glue *Do a dry fit before the final glued assembly If you choose to mount the light, please use the ‘’Mounted Lamp'' print profile as the clamp, mounting slides and different side columns are included. Take note that the wall mount is designed to be used with #8 screws. Smooth sides for the ‘’Table Version'' Sides with a notch to hold the clamp and arrows pointing up for help during assemble on the ‘’Mounted Version'' Features specific to 3D printing have been used in this project, notably the following ones : Flexibility of thin prints : the lamp shade is printed flat on the buildplate to minimize color changes. The flexible nature of thin 3D prints makes it so the lamp shad can be bent into the right shape for this project Adaptive layer height in the slicer is used on the top piece, this ensures that there is a smooth finish throughout the print Printing tips : Print the ‘’Lamp Shade'' profile as well as either the ‘’Table Version'' or ‘’Mounted Version'' profile Make sure your bed is clean and that bed adhesion is not a problem, especially for the lamp shade print - Don't hesitate to use glue Make sure you let the lamp shade cool down properly before taking it off the bed Make sure to use the provides print profiles as the settings have been precisely tuned Post processing before assembly (see Youtube Video HERE for assembly instructions) : Remove the supports from the top and bottom pieces If you chose the mounted version, remove the supports from the clamp If you chose the IKEA Skadis mounting slide, cut the brim off of the pegs and remove the supports