About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA Default White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Red At layer #15 (1.28mm) swap to Lemon Yellow At layer #24 (2mm) swap to White for the rest.