About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Lemon Yellow At layer #22 (1.84mm) swap to Ivory White for the rest.