About this 3D model

Model Model is 35 cm long, consists of 119 pieces and needs 1400 g of PLA filament (and some TPU for tyres). Total print time is about 2 days. Tyres need to be printed from TPU. I'm using Colorfabb Varioshore TPU Biggest part is 310 mm long and it DOES NOT fit A1 mini build plate. Worm gear must be printed with 0.1 mm layer height. Postprocessing Remove supports. Use deburring tool to remove sacrificial bridging inside the holes. Assembly See attached assembly guide. Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended). See my other upscaled creation: https://makerworld.com/en/models/114353#profileId-122927 https://makerworld.com/en/models/133466#profileId-144784 https://makerworld.com/en/models/146718#profileId-159991 https://makerworld.com/en/models/162579#profileId-178451 https://makerworld.com/en/models/175873#profileId-193384