About this 3D model

https://www.buymeacoffee.com/maxt ---------------------- Window coverings that operate with continuous cord or bead chain loops are a strangulation hazard to kids. Limiting access to the cord or bead chain loop is a simple way to make these window covering safer for kids. Free-hanging loops should be attached to the wall or floor with help of a Tension Safety Device like this one. Make sure that it is installed so that there is tension in the loop. Print on the side, 0.4mm nozzle, 0,2 mm layer height. Support is not required. Brim is highly advised (depending on your printer heatbed's adhesion). I recommend using PETG over PLA as PLA might deform/break in the sunlight.