About this 3D model

Simple airsoft kit Compatible with Double Eagle URT45 magazines. (Some free adapters for MP5 magazines are available.) Works with a V2 gearbox and M4 hop-up chamber. The gearbox wiring is rear-mounted (separating the wires with connectors is recommended otherwise, the stock mounts will require modification). It is also designed to route the wires from the front, in case you want to carry the battery in an external case. Includes two stock adapters: one for M4 tubes and another for stocks with a Picatinny rail. Volt guide non funtional Some parts may require modification or sanding for proper function. Assembly video included. Requires the following components: - Magazine retainer spring - 3mm pin (a trimmed nail can also be useful) - Standard M4 selector switch - Pins for V2 gearbox - Glue - Nuts M5 (2.5mm wide) - M5 screws (10mm long spiral) - The use of a QD fastener is recommended to reinforce the joint between the two parts of the upper. - M4 stock tube (if this type of stock is desired) Depending on the print quality, some parts may need to be adapted or sanded.