About this 3D model

Kindle paperwhite (11th gen): Item model number: M2L3EK Product Dimensions: 17.4 x 12.45 x 0.81 cm; Weight: 204.12 Grams ASIN: B09TMF6742 Filament Type: PETG manufacturer: 123-3d.nl Colour: transparent Diameter: 1.75 mm Flow ratio: 0.95 Density: 1.27 Price: 30 Softening temp: 75 Recommended nozzle temp: Min: 255 Max: 245 Print temps: Nozzle used nozzle: Bambu Lab P1S 0.4mm Initial layer temp: 235 Other layer temp: 235 Textured PEI Plate Initial layer: 75 Other layer: 75 Cooling: No cooling at all, turn it off. Retraction: Nothing special. Printer setting (P1S) for transparent PETG (everything in mm): quality tab: Layer height Layer height: 0.1 Initial layer height: 0.1 Line width Default: 0.5 Initial layer: 0.5 Outer wall: 0.5 Inner wall: 0.5 Top surface: 0.5 Sparse infill: 0.5 Internal solid infill: 0.5 Support: 0.5 Seam Seam position: Aligned Precision Slice gap closing radius: 0.049 Resolution: 0.012 Arc fitting: Checked X-Y hole compensation: 0 X-Y contour compensation: 0 Elephant foot compensation: 0.15 Ironing Ironing Type: No ironing Wall generator Wall generator: Classic Advanced Order of walls: inner/outer Print infill first: Unchecked Bridge flow: 1 Thick bridges: Unchecked Only one wall on top surfaces: Top surfaces Only one wall on first layer: Unchecked Avoid crossing wall: Unchecked Strength tab: Walls Wall loops: 2 Detect thin wall: Unchecked Top/bottom shells Top surface pattern: Aligned rectilinear Top shell layers: 0 Top shell thickness: 1 Bottom surface pattern: Aligned rectilinear Bottom shell layers: 0 Bottom shell thickness: 0 Internal solid infill pattern: Aligned rectilinear Sparse infill Sparse infill density: 100% Sparse infill pattern: Aligned rectilinear Length of sparse infill anchor: 400% Maximum length of sparse: 20 infill anchor: 35 Advanced Infill/WaII overlap: 35 Infill direction: 0 Bridge direction: 0 Minimum sparse infill threshold: 15 Speed tab: Initial layer speed Initial layer: 20 Initial layer infill: 20 Other layers speed Outer wall: 25 Inner wall: 25 Small perimeters: 50% Small perimter threshold: 0 Sparse infill: 25 Internal solid infill: 25 Top surface: 200 Slow down for overhangs: Checked Overhang speed: 10%, 25%: 25 25%, 50%: 25 50%, 75%: 25 75%, 100%: 10 Bridge: 25 Gap infill: 30 Support: 25 Support interface: 25 Travel speed: default Acceleration: Normal printing: 9500 Initial layer: 250 Outer wall: 250 Inner wall: 250 Top surface: 250 Sparse infill: 250 Support tab: not necessary but just to be sure use it. If it makes print broken, don't use! It would be amazing if you liked or saved my print. I have spent quite some time designing this (it was totally worth it). Thanks! And keep printing.