About this 3D model

A small case to convert a TinyS3 to a USB-Stick. Handy for all kinds of home automation, eg. as Nuki Hub . BOM: Part sources are just examples… QTY Part Source 1 TinyS3 TinyS3 1 USB-C gender changer (male to male) Amazon 4 M3 x 3mm heat set inserts CNC-Kitchen 4 M3 x 8mm low profile socket head screws CNC-Kitchen Print Recommendations: Tolerances are tight, so make sure your printer is dialed in. Material: PLA Layer height: 0.10 mm Infill: 15% Gyroid Wall loops: 2 Wall generator: Arachne Supports: Tree (manual), counterbores only Assembly: Use a hex key to push out the counterbore supports from the top Apply the heat set inserts. Be careful to not break off the legs pushing down on the PCB, they are fragile Insert TinyS3 and USB-C gender changer Assemble top and bottom Boost Me If you find this model useful, I would greatly appreciate a boost!