About this 3D model

This is a 2" (or up to 55mm) wide label holder, which is designed to hold a spool of labels which is up to 60mm in diameter, with a 25mm hole for the tube. The labels I am using are dissolvable labels for food containers, which are 1"x2" (just make sure to get the 2" wide rolls and not the narrower 1" wide rolls). The label holder can mount on the wall, and when it needs to be refilled, just unscrew the cap and remove the body of the dispenser which makes setting up a new roll easy. I mounted it to a cabinet using 3M command strips, and it has been rock solid. This is a remix of Flyinriz's "Sticker or Label Dispenser (parametric)": https://www.thingiverse.com/thing:2361685 And: My "Filament guide for dry box, with o-ring screw cover IMPROVED VERSION" https://www.thingiverse.com/thing:3951296 I posted some pics of the design process on my blog below: http://www.mystoopidstuff.com/blog/quick-label-dispenser-work-in-progress Boost Me Thanks for supporting my work! If you find these models useful, please post a like or a comment with some pics of your prints. You can find the other things I'm working on at my blog here . You can also follow me here or on Printables to see what new stuff I post. If you would like to support my work, you can Boost this model, or even Buy Me A Coffee using this link: https://www.buymeacoffee.com/mystoopidstuff Thanks for looking! Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.2mm Infill: 20% gyroid Filament: Duramic3D PETG Notes: I printed this with a 0.6mm nozzle and used 0.3mm layers for most parts, but I used 0.2mm for the cap. This should not require any supports. Parts are not oriented for printing. Category: Household