About this 3D model

X1CC P1SC分体硅胶擦嘴器，可随时替换因磨损或热变形导致损坏的刷头，需要两个M3X10沉头螺丝，将按尺寸切好的硅胶条（15mm-16mm）通过速干胶水粘在方孔内，再用M3X10的沉头螺丝固定在主体上，无需支撑，用PETG-CF或ABS-CF也可以获得很好的效果。 假如您想要单色打印，无需logo，请下载或直接打开第二个配置，第二个配置已删除logo，主体更简洁，打印更快速 假如你不喜欢用胶水固定硅胶条，你也可以选择另一种硅胶固定器。它通过从侧面滑入硅胶条来固定硅胶条，使其更容易调整。链接： Extremely Tight Alternative Part for EricYC‘s SILICON NOZZLE WIPER(分体硅胶擦嘴器) 来自 qiqiji - MakerWorld 下面是硅胶条的购买链接 https://detail.tmall.com/item.htm?_u=h7au44lbb5e&id=554269682402&spm=a1z09.2.0.0.7f1b2e8dVvhmiR&skuId=4962245431132 X1CC P1SC split silicone lip wiper, which can replace the worn or thermally deformed brush head at any time, requires two M3X10 countersunk screws. The silicone strip (15mm-16mm) cut according to the size is glued in the square hole with quick-drying glue, and then fixed on the main body with M3X10 countersunk screws. It does not require support, and good results can also be obtained with PETG-CF or ABS-CF. If you prefer a version with no logo and monochrome printing, please select the second configuration.The second configuration has removed the logo, making it more concise and faster to print. If you don't like using glue to fix silicone strips, you can also opt for another version of the silicone fixator. It fixes the silicone strip by sliding it in from the side, making it easier to adjust. The link is below： Extremely Tight Alternative Part for EricYC‘s SILICON NOZZLE WIPER(分体硅胶擦嘴器) 来自 qiqiji - MakerWorld