About this 3D model

Boost Me I thank you, a boost is always appreciated :) HELLO EVERYONE!! I have created this simple support to install the PANDA TOUCH screen in X1C style at a LOW PROFILE at three different angles according to your needs. (15°-20°-25°) With this magnificent support you have the possibility to remove the screen after configuration from your P1P/S and install PANDA TOUCH simply and quickly. Screws: 2 domed head screws 3x12 + 2 washers (BAMBU LAB front) 4 countersunk head screws 3x10 (PANDA TOUCH magnetic support) (21/11/24) I have modified the support and added 2 simple spacers to be inserted in the lower part between the PANDA TOUCH support designed by me and the PANDA TOUCH MAGNETIC support so as to tighten the 2 LOWER 3x10 screws without problems. See ASSEMBLY GUIDE. (17/12/2024) In addition to having created three different angles (15°-20°-25°) I have created a guide for the USB C cable to quickly install your panda touch. Wiring possibilities: disassemble the P1S front panel and rear board so as to have space to pass the USB C cable where the existing original cable passes so as to not have any "flying cable". HIDDEN CABLE, BETTER LOOK if you want a quick and fast assembly instead, use the seat designed by me and pass the cable upwards and consequently make it enter the existing top right hole. CABLE IN SIGHT. HAPPY PRINTING.