About this 3D model

This project converts an IKEA STYRBAR remote control into a FUGA low-current switch. This is the first design that uses a CR2032 battery. Therefore, the battery life is not expected to be acceptable. However, initial studies have shown that the standby consumption is the same as with the previous model . Module Programming If you do not want to use the module from an original remote control, it is necessary to reprogram it. Alexander Bruhn Blindbæk has created a guide for this. See Flash-guide_J-link.zip under downloads. PCB layout Diagram Bill of Materials Designator Value LCSC Part C1 10uF C1710 C2 100nF C15008 C3 10nF C1710 C4 10nF C1710 C5 10nF C1710 C6 10nF C1710 C7 10nF C1710 D1 LED C84262 F1 FUSE C136339 R1 N/A R2 10kΩ C17414 R3 N/A R4 N/A R5 10kΩ C17414 R8 1kΩ C17513 S1 TACT C343618 S2 TACT C83916 S3 TACT C83916 S4 TACT C83916 S5 TACT C83916 S6 TACT C221666 Video