About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Default White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Red At layer #6 (0.56mm) swap to Black At layer #8 (0.72mm) swap to Black At layer #10 (0.88mm) swap to Black At layer #11 (0.96mm) swap to Red At layer #12 (1.04mm) swap to Jade White At layer #16 (1.36mm) swap to White At layer #18 (1.52mm) swap to Black At layer #19 (1.6mm) swap to Black At layer #20 (1.68mm) swap to Black At layer #21 (1.76mm) swap to Red At layer #22 (1.84mm) swap to Red At layer #23 (1.92mm) swap to Yellow At layer #24 (2mm) swap to Yellow At layer #25 (2.08mm) swap to Jade White for the rest.