About this 3D model

A filament dryer box designed for the Hamilton Beach 32100C Food Dehydrator. Requires a build plate of 325x255 mm or larger to print the Frame. Hardware required: Hamilton Beach 32100C Food Dehydrator For each Roller and/or Threaded Shaft: 2x 626Z bearings (6x19x6mm) 2x M6x12mm (or longer) Socket Head Bolts 2x M6 lock nut For each Nut A 1x M4x10 Button Head bolt 1x M4 Nut For each Panel: 6x M4x8mm bolts 1x PC4-M10 Pneumatic Connector for each Panel A. I added a blank panel as a step file if you want to modify it yourselves. Parts to print: 1x Frame 4x Panels I used 2x Panel B's at the front and 2 Panel A's at the back. If you want to use Rollers (Spool rolling on its circumference): 4x Rollers Each roller takes a bearings assembly at each extremity (see picture). If you want to use the Threaded Shaft (Spool rotating around its center axis): 2x Threaded Shafts Each shaft takes a bearings assembly at each extremity (see picture). 2x Nut A The Nut A's can be clamped on the Threaded Shafts with the M4 bolt and nut, allowing easier screwing and unscrewing of the Nut B to hold the spool. 2x Nut B Printing: Support for the Frame is already included in the file. The Panel holes should be able to bridge across without support. I printed the Frame and Panels at 0.32 mm layer height, and the rest at 0.2 mm.