About this 3D model

This design is heavily inspired by the Wallmount for Bambu AMS model created by StefanWoX . I wanted my AMS unit slightly further from the wall and saw room for improvement so I spun up my own. This version is stronger than my original version and better supports the full length of the AMS. The AMS unit will sit ~65mm from the wall with these mounts which will allow you to fully open the lid. The wall mounting holes are identical to the original version so you can easily upgrade for more support. Testing I've included a test model so you can quickly print out a low quality piece to ensure the key parts will fit with your AMS unit. The end of the test piece will roughly be flush with the back of the AMS unit. If the test piece doesn't fit for you please message me so I can update the model. Assembly You will need (6) M4 x 20 cap screws and nuts to attach the shelf piece to the bracket. The holes for mounting the bracket to the wall have a diameter of 6mm with a head diameter of 12mm and a head depth of 2mm. I used some heavy duty drywall anchors from Home Depot to mount mine. Updates 2025-03-29: Confirmed to fit the AMS 2 Pro 2024-04-21: Removed the second from last wall in order to fit both 3-slot variants.