About this 3D model

Constellation - Hueforge Both AMS and non-AMS profiles uploaded, search for yours. AMS will change automatically, the non-AMS profile has pauses to swap filaments. This is 150mm x 150mm , you can scale up and down, DO NOT SCALE the Z Axis ! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Blue At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow for the rest.