About this 3D model

One of my favorite films and books of all time Christine. 6 color print and it jumps between the same colors a couple times. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 1.6 PLA BambuLab Matte Dark Brown Transmission Distance: 1.9 PLA BambuLab Matte Scarlet Red Transmission Distance: 2.1 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Matte Ivory White Transmission Distance: 4 PLA BambuLab Matte Dark Brown Transmission Distance: 1.9 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Dark Brown At layer #8 (0.72mm) swap to Scarlet Red At layer #9 (0.72mm) swap to Mandarin Orange At layer #12 (1.04mm) swap to Ivory White At layer #16 (1.36mm) swap to Dark Brown At layer #21 (1.76mm) swap to Lemon Yellow for the rest