About this 3D model

Guide pulley for slow speed flat belts. There are two versions one with a 608 bearing bore and the other version is with a 6201 bearing. Version 608 dimensions : 36x60mm Version 6201 dimensions : 42x60mm ---------------------------------------------------------------------------------------------------------------- Pulley for belt type SPZ/Z with diameter 67mm. There are holes for 6201 bearings on the pulley, unfortunately it cannot be fitted with taper bush. The pulley can of course also be used as a pulley for the rope. I recommend to increase the wall thickness significantly due to abrasion. I recommend in both cases to increase the wall width in the slicer , add 80% infill and then sand with fine paper after printing.