About this 3D model

Description: Need some motivation? Take a spin on the chore wheel. There is a 25% chance of landing on each option, or is there… Comes in few different options. There is a full size and mini with both of those having the Drink A Beer or Watch My 3D Printer option. I also added step files for ones that are blank so you can put in your own text. Parts Overview: Each wheel has 5 parts and are all attached as one on a kit card: Wheel Left & Right Legs Spinner Spinner Cap Printing and Assembly: The parts all print as one on a kit card. Please use the profile I have listed as it has been optimized for this layout. This print requires two colors and was setup for use with an AMS however can be done without. The parts will need cut off of the kit card and then the support will need removed. All of the parts will snap together like shown in the video above. The spinner shown spin smoothly but if it doesn't, you may need to sand or file the z-seam on the spinner or the inside of the hole on the wheel. Everything should snap together easily. You will need good bed adhesion in order to print the spinner as there is only a small amount of contact area on the bed due to orientation. It is oriented this way to minimize the amount of filament changes needed(only one). Good luck printing!