About this 3D model

(sale of the entire set upon request)A motorboat hull based on the Project 1415 Flamingo type with a solid deck. This model is designed for further model modification after printing. Included:• A one-piece hull in actual size, for self-preparation for printing• A 1:50 scale hull cutout (final length - 424 mm) for printing on a 100x100x100 mm print bed Recommended print parameters:• Layer thickness - 0.15• Wall layers - 3-6• Top and bottom layers - 0 or 1-2 • Infill - 0 Important note:Regardless of whether you print with infill on the bottom and/or top, it's best to print the transom section separately, setting the top layer number as 1.5-2 times higher than for the wall . Otherwise, the transom will print as a threads rather than a solid.