About this 3D model

UPDATE 2024-03-08 - Version 2.0 of this make adds a 1mm x 1.25mm edge at the bottom of the cover, to help ease installation on the printer. It keeps the bottom edge 1mm outside of the space being covered, but keeps it lined up perfectly straight with the edge. Do not force version 2.0 completely into the opening it is covering , this is meant to line up and hold the bottom edge 1mm outside of the space being covered. Boost Me These designs take a lot of time to make and I would really appreciate it if you would boost my model to show that you like it. Thank you. --------------------------------------------------------------------------------------------- This cover fits inside the top front of the Bambu Lab P1S, just to the right of the USB port (when facing the printer). There are 4 holes on the top of this cover plate and each lines up with a pin inside the top edge of the printer. Line up the first hole and pin, press it in, then work your way over, pressing each pin into the cover plate. The bottom edge should be a pretty tight fit but it snugs up nicely. This keeps any cables for your LED lights out of the way of your print head when printing large items. Printed in black Sunlu PETG at 0.2 Standard with default settings in the Bambu slicer.