About this 3D model

IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 1 controllers. If you are looking for the Quest 2 version, see here . Introducing the "Chewey_GLK-17_Q1"! For more details, please refer to the Quest 2 version's descriptions . The picture is from the Quest 2 version, however, everything is the same except for the sizing of the hollow to fit the respective controller. In addition to the reference models I noted in the Quest 2 posting, this Quest 1 model also uses the 3D scanned controller image posted by user aolshove on Thingiverse . Each hand controller needs: 1x Grip 1x Slide 1x Front lower 2x Screws Assembly notes: One screw is used to join the Grip with the Front lower. These were separated for ease of printing. One screw is used on the side to secure the Slide in place in case it slips off while mid VR session. NOTE: The grip STL is for the RIGHT hand. Simply mirror it to print for the LEFT hand. Derivatives and remixes are under Attribution-NonCommercial-ShareAlike, but please also include its original name "Chewey_GLK-17_Q1" somewhere on the final design. Please do not monetize on this model. Thanks! Print instructions Layer height: 0.2 Infill: 15% Support: see "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf" Refer to "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf" for print orientation and paint on support using PrusaSlicer. The grip and front lower should be the same color.