About this 3D model

This is my first Hueforge project, I found this fan art from @Arles48 . I did not create this and found it on a public website. I left the watermark on it to clearly state that this is not my creation and is NOT for commercial use in any shape or form! I'm a huge Elden Ring fan and wanted to have some Art on my walls, more uploads will follow. Settings: 0.4 mm Nozzle, textured plate, Bambu X1C Print at 100% infill with a layer height of 0.08 mm with a base layer of 0.16 mm Filaments Used: PLA Sunlu Matte Black Transmission Distance: 0.3 PLA Jayo Matte Dark Gray Transmission Distance: 0.6 PLA Elegoo Matte Light Gray Transmission Distance: 0.3 PLA Bambu Basic Gold Transmission Distance: 5 PLA Das Filament Yellow Transmission Distance: 6 PLA+ Esun Cold White Transmission Distance: 6 Swap Instructions: Start with Black At layer #9 (0.8 mm) swap to Dark Gray At layer #11 (0.96 mm) swap to Light Gray At layer #13 (1.12 mm) swap to Gold At layer #15 (1.28 mm) swap to Yellow At layer #19 (1.6 mm) swap to White for the rest Use the .3mf file for exactly these filaments but change to what you've got in the slicer. For any other settings I used check out the picture. Thanks to @Don Mantis because I used the same settings as for his art.