About this 3D model

This is my first Samsung Galaxy S24 case, now version 1.1 - a remix from lucas_sp12. No support is required in the slicer settings :-) The green parts in the picture are only supports for easy printing and must be removed afterwards. Removal can be easy or difficult depending on material and printer. Version v1.1 (1.2mm) changes: The entire housing is 0.2 mm thicker and therefore more stable. The volume button cutout was slightly adjusted. The microphone holes are slightly larger so that it fits better. The support is slightly thinner so it can be removed more easily. Additional +33% thicker version (1.6mm) v1.1: I also designed a more robust version with a 33% thicker wall all around. New +66% thicker = maxi version (2.0mm) v1.1: Now also a maximum robust version with 66% thicker walls all around for adventures. I use TPU filament shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print, the filament should be dry. See also version 2 with AI text --> https://makerworld.com/en/models/229311 and Voronoi + Organic version 3 --> https://makerworld.com/en/models/432695 and new Halloween version 4 --> https://makerworld.com/de/models/641265 Boost Me If you love my work, consider boosting the model as well. Your likes and 5-star reviews are greatly appreciated and help a lot. If you enjoy this model, be sure to check out my other creations :-) Happy Printing Toni :-) Category: Mobile Phone