About this 3D model
This is my second Samsung Galaxy S24 case with S24... AI Text - a remix from lucas_sp12. No support is required in the slicer settings :-) The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or difficult depending on material and printer. New version v2.0 changes to v1.0: The entire housing is 0.2 mm thicker and therefore more stable. Volume button cutout adjusted slightly. The microphone holes are a little larger so that it fits better. The Support is a little thinner so it can be removed more easily. Now with " S24 Galaxy AI " Text :-) I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry. See also version 1 without text --> https://makerworld.com/en/models/229309 and Voronoi + Organic version 3 --> https://makerworld.com/en/models/432695 and Halloween version 4 --> https://makerworld.com/de/models/641265 Happy Printing Toni ------------------------------------------------------------------------------------------------------------------------------------------------------------- This is my second Samsung Galaxy S24 case with S24... AI Text - a remix from lucas_sp12. No support is required in the slicer settings :-) The green parts in the picture are merely supports for easy printing and must be removed afterwards. Removing can be easy or difficult depending on material and printer. New version v2.0 changes to v1.0: The entire housing is 0.2 mm thicker and therefore more stable. The volume button cutout was slightly adjusted. The microphone holes are a little larger so that it fits better. The support is a little thinner so it can be removed more easily. Now with " S24 Galaxy AI " Text :-) I used filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry. See also version 1 without text --> https://makerworld.com/en/models/229309 and Voronoi + Organic version 3 --> https://makerworld.com/en/models/432695 and Halloween version 4 --> https://makerworld.com/de/models/641265 Happy Printing Toni Category: Mobile Phone