About this 3D model

This is a simple prototyping mount to hold two SparkFun LED Matrix breakout boards. I'm working on a larger LED Matrix setup, but wanted to do some software prototyping using two of the MAX7219 LED controller ICs. Here is the parts list and purchase links: Hardware: (1) [M2.5 Tap](http://www.mcmaster.com/#8305a31/=qgpmfo) (8) [M2.5 x 5mm Machine Screws](http://www.mcmaster.com/#91292a009/=qgpmpz) Electrical: (2) [SparkFun LED Matrix Kit](https://www.sparkfun.com/products/11861) (4) [0.1" Crimp Connector Housing 1x5](http://www.pololu.com/product/1904) (15) [Female Crimp Pins](http://www.pololu.com/product/1930) (5) [Male Crimp Pins](http://www.pololu.com/product/1931) (1) [Crimping Tool](http://www.pololu.com/product/1929) (N/A) Wire and Wire Strippers (N/A) Soldering Iron NOTE: You will also need a microcontroller (or anything with Digital Input/Output pins) to interface with the LED Matrix controller ICs. I personally have been using an Arduino.