About this 3D model

Rotating Fidget Puzzle Wheel Features: 9 Sides with 26 Tiles 3 Spinning Sections Very Hard To Solve Easy Assembly 100% 3D Printed A Fun Fidget Assembly: Slide the ‘Core’ over the ‘Frame Bottom’ ensuring you line up the centre groove. Slide a ‘Wheel’ over the ‘Core’ ensuring you line up the notches with the bumps in the ‘Core’. Repeat with the other 2 wheels. Slide in all of the coloured ‘Tiles’ - You can insert them in a solved or unsolved state. All 'Tile slots should now be full except for 1 that stays empty. Screw the ‘Frame Top’ onto shaft of ‘Frame Bottom’ until it is nice and snug. The puzzle is now ready! Extra Info: The rotating action works with a compliant ‘notch’ system. As you spin each wheel the tabs within the core will deform creating a satisfying clunk at each of the 9 positions. If the action feels stiff then back the ‘Frame Top’ off 1/8th of a turn. Printing the ‘Tiles’ can be troublesome. It may take a few attempts to get a full set of 9 colours. The print profile included has 2 plates- Plate 1 should be printed once in a single colour. (This needs to be different than all of the other 8 colours) Plate 2 should be printed twice with a complete swap of all 4 AMS colours in between prints. This will give you total of 9 different colours and 1 full puzzle wheel Thanks for looking! Please rate and review your printing experience :)